Losi 1:8 810 Nitro Off-Road RTR Buggy

A package boasting the most superior power to weight ratio. A Losi 3.4 nitro engine that delivers the most power in its class. Interference-free Spektrum 2.4GHz DSM technology. A lightweight aluminum chassis. The 4-wheel drive 810 Buggy RTR has it all. And it’s affordable. When you want a 1/8-scale ready-to-run buggy that’s high on features, the 810 delivers. 



Source: www.losi.com

New Desert Militia Clear Body

Desert Militia Clear Body for Slash, Slash 4x4, Ultima SC, SC10 (with trimming) and Blitz (with trimming)


This is a Pro-Line Desert Militia Clear Body. Become a desert class mercenary hunting down the competition with the Pro-Line Desert Militia body for SC trucks.

What's Included:

Clear Desert Militia Body
Window masks
Militia Decal sheet

Body Specs:

Length: 521mm
Width: 234mm
Height: 145mm
Wheel Base: 325mm

3341-00 Desert Militia $33.95
Source: www.prolineracing.com

Kyosho Inferno MP9 TKI 2 Spec A

Introducing the new MP9 TKI 2 Spec A, race roller edition. In the two years since it made its mark at the 2008 World Championship, the prototype MP9 Kyosho International has forged the cutting edge of performance technology with the latest version 2. Tested and proven at numerous international racing events, design upgrades have evolved multiple areas of the chassis platform to a new level. However perhaps the greatest innovation has been the dramatic reduction in cost, despite the significant upgrades and performance improvements. The chassis design focus is on efficient traction and is realized through short suspension arms and unique rear hubs that produce effective traction with light suspension stroke. Shock absorber design has changed from spacer setting adjustment to dial adjustment and incorporates the previously optional shock pistons with tapered holes that produce optimal piston speed and damping power over long running times. Other features include a new low-height body design with less front-end resistance that generates aerodynamics for a competitive edge and stable posture through the air. With the power of the most advanced racing performance firmly in your grasp, the innovative design of the new TKI 2 puts racing glory within reach.

 

Features:

• New Threaded Big Bore Shocks - Dial adjustable big bore shocks allow precision adjustment of front-rear and left-right suspension.
• New Design MP9 Wheel - New design of the dish wheels is lightweight with optimal rigidity and supports sure traction and effective tire grip.
• New Tapered Shock Pistons - Shock pistons with taper holes deliver optimal oil flow resistance and piston speed for superior damping effectiveness.
• Improved King Pin Design - Longer king pin and longer flanged collar improves reliability and prevents knuckle coming loose in the event of hard contact or a crash.
• Aluminum Wing & Radio Post - Machined aluminum wing stay posts and radio plate posts deliver improved reliability through increased strength and rigidity.
• Machined Rear Sus. Holder - Machined aluminum rear suspension holder delivers increased durability, even under the stress of big jumps.
• New Suspension Bushings - New white suspension bushings are now included provide you high visibility of your setup.
• New Aluminum Rear Hubs - New design of the aluminum rear hubs effectively realizes shorter suspension arms to deliver reactive movement for traction efficiency.
• New Body Design - new low-height body design with less front-end resistance that generates aerodynamics for a competitive edge and stable posture through the air.
• New Air Filter - This high capacity air filter allows a long and consistent air feed to your engine.
• Reliability & Workmanship - After partial assembly by our skilled staff, all Spec A kits are inspected by the Inferno master Yuichi Kanai to guaranty reliability on all kits.

 Standard Features:

• Ultra Low C.O.G - Ultra low center of gravity, lightweight and optimal weight balance all combine to deliver the ultimate racing weapon.
• More Down Force - Bolted on large wing generates powerful down force. New ribbing at the back results in improved rigidity.
• 7075 Grade Aluminum - Hard main chassis made from 7075-grade aluminum, hard shock stay, big bore shocks and aluminum knuckle arms realize great strength, durability and rigidity.
• Hard Anodized Components - The shock stay and main chassis are hard anodized for improve resistance against dirt and damage.
• Composite Torque Rods - Resin torque rods fitted on front and rear contributes to moderate flexibility and smooth running performance.
• Endless Adjustments - Roll center can be adjusted by changing the direction of the spacer inserted into the lower arm of the rear suspension. Also, the one-piece ball and washer ball-ends are an added maintenance feature
• Upright Servo - Servo is mounted upright for easy maintenance and is dropped 2mm to contribute to the lower center of gravity. The hard chrome finish to the metal parts is more resistant to damage and dirt than anodizing.
• Extremely Light Weight - The smaller differential units on front and rear with grooved cup joints, aluminum balls and the flexing shape of resin parts effectively lightens the weight while giving the chassis rigidity, more durability and strength.
• New Fuel Tank - Newly designed fuel tank features finger hook for fast and reliable refueling and realizes stable fuel supply in even under severe posture changes.
• Wraparound Side Guards - Grooved face in side guard matches the thickness of velcro tape and prevents dirt getting inside the chassis. Complete wraparound side guards only found on Kyosho MP9.
• Equipped With Mud Guards - Mud guards on the rear arm prevent dirt entering the drive shaft and getting inside the wheels.
• We Have You Covered - 3 types of servo horn included for various R/C systems (SANWA / KO / for JR, FUTABA and Hitech)
• Hex Screws - Kit includes all hex screws enough said!
• Weight Balance - Engine position moved 15mm forwards and 5mm to the center compared to the MP777. Also the height has been lowered by 1mm for ideal weight balance.
• New Suspension Design - Newly developed suspension uses bushing for easy maintenance and rationalizes the setting order.
• Increased Diff Case Capacity - Center differential realizes improved heat dissipating brake disc and increased case capacity for stable control through to the end of the race.
• Optimal Race Settings - Fine tune for the optimal race setting with adjustments to wheelbase, tread, roll center, caster angle, toe angle and camber change.
• 3 Differentials = Real Time 4WD - Features the Inferno's signature shaft-driven 3-differential full time 4WD chassis.

What is a ARR? - A ARR Kit is a higher level semi-assembled vehicle that included nearly everything you will need to get started. You will need to supply items like engine, pipe, body, tires, wheels and radio equipment. Required items may vary from kit to kit so please see Required Items For Completion section for full list.

All made in Japan!
Everything from the ground up is made in Japan for the highest level of quality and reliability.
All Spec A kits are checked by Yuuichi Kanai!

Spec A (ARR) are also referred to as a Race Roller is a semi assembled kit. All Spec A kits are factory assembled by dedicated staff with years of RC experience and thoroughly checked by the designer Yuuichi Kanai himself to deliver the best buggy known to man. Even the small details such as ride height and alignment are strictly measured and set one by one. All this time and care allow you to receive a race ready chassis.

Kit Contents 

• Semi-Assembled Kit
• New Clear Body
• New Wheel Set
• Decal Sheet
• Instruction Manual

Required For Operation

• 2-channel, 2-servo R/C System for cars
• 21-class Engine
• Pipe & Header
• Engine starting tools
• Batteries for R/C system
• Tires & Inserts

Source: http://www.kyosho.com/

DE Racing “Trinidad” Wheels for the Team Associated SC10

Named after a rugged valley section of the prestigious Baja 500 and 1000 desert races, DE Racing brings you the “Trinidad” SC wheel. The most detailed and scale wheel available for your SC10.


DE Racing specializes in highly innovative performance products and our wheels are no exception. Manufactured in the U.S.A. from the finest possible materials and utilizing an advanced ribbing design, “Trinidad” wheels offer strength and durability while still remaining lightweight. Intended for the highest levels of competition they also feature ROAR legal widths and bead diameters in a one piece glueable design.

Available offsets:

DER-SCT-ARB For Team Associated SC10 Rear / BLACK
DER-SCT-AFB For Team Associated SC10 Front / BLACK
DER-SCT-ARW For Team Associated SC10 Rear / WHITE
DER-SCT-AFW For Team Associated SC10 Front / WHITE

Wheels feature:

Realistic scale appearance
Advanced ribbing design for strength and durability
Roar legal widths and 2.2 / 3.0 diameters
Available for front and rear applications
Made in the U.S.A.

Source: http://www.deracing.net/

Losi Rockstar Graphics Kits

Awesome new graphic sticker kits from Losi  designed to Give your ride and transmitter a rocked-out Rockstar look

Anyone who is a fan of Rockstar image/apparel will want to have their vehicle or transmitter match

Kits available for:

Spektrum DX3S

Spektrum DX3R

Losi Comp Crawler

Losi Strike 

Losi 8IGHT 2.0

Losi 8IGHT-T 2.0

Source: http://www.losi.com/



Obama cant gymkhana check 2:30 mark

Cant resist posting these vids!

Ken Block Gymkhana 3 part 2! Enjoy!

1/8 8IGHT-E 2.0 4WD Buggy Race Roller Without Electronics

Combining cutting-edge vehicle design with an unmatched combination of features and hi-tech parts and precise, at-the-factory assembly, Race Rollers are dialed right out of the box.

At a Glance

Team Losi Racing has taken the most innovative, revolutionary 1/8-scale buggy design in racing history and made it even better, with race engineered features and design elements that surpass every other buggy on the market. Then, you get to equipped it with the latest cutting-edge brushless power systems that you want, for unbelievable electric race performance.

Once you’re on the track, you’ll be dominating with features like a Team Losi Racing exclusive Tuned Flex Technology chassis design, lightened shock towers, updated suspension geometry and much more.

And Team Losi Racing has gone one step further, offering this innovative race chassis with the most user-friendly setup imaginable. Using track-tested tuning setups from top racers, the 8IGHT-E 2.0™ Race Roller® is professionally dialed and assembled in a track-ready configuration.

All you have to add is the power system and radio system of your choice and a battery, then take the track by storm. The 8IGHT-E 2.0 brings the latest high-tech design and pro level race parts to the buggy class, complete with a long list of features that are only available as options on other buggies.

Features:

The 8IGHT 2.0 chassis with Tuned Flex Technology (TFT) grants huge performance gains on the track, by providing superior grip and handling balance

An enhanced radio tray design optimizes the position of the steering servo for better response, while positioning the weight of the other electronics in a balanced location

The servo saver provides increased consistency due to the enhanced surface geometry

Lightened shock towers reduce the overall weight of the vehicle for faster speeds and quicker lap times, while their optimized design offers increased strength and durability

A pressed steel bushing in the Ackerman brace provides increased movement, thus increasing steering precision

The heavy-duty dogbones and outdrives are designed for increased durability and to withstand the demands of 1/8-scale off-road racing

Product Specifications

Type: Electric Competition Buggy Race Roller

Scale: 1/8

Length: 19.56 in (497mm)

Width: 12.13 in (308mm)

Wheelbase: 12.71 - 12.87 in (323-327mm)

Weight: 6 lb 12 oz (3062 g) - without battery

Chassis: Tuned Flex Technology (TFT)

Drivetrain: 4WD

Motor or Engine: 1/8-scale Brushless Motor (not included)

Speed Control: 1/8-scale Electronic Speed Control (not included)

Kit/RTR: Race Roller

Body: Clear Polycarbonate Buggy



LOSA0807 - $599.99

Source: http://www.losi.com/